Electrophoretic coating Vortex Pump Peripheral Water Pump DB-750A
Peripheral Water Pump Description
The DB series vortex water pump with Electrophoretic coating able
to offer high pressure in relation to comparatively low powers and
which have particularly steady operating curves. They are qualified
in domestic fittings, to increase the system pressure in aqueducts
and for automatic water distribution by small autoclave tanks or by
hydrosphere units. For the correct function of the pump, use clean
water or non-aggressive liquid only, without sand or other solid
Compared with spray paint, it has the following advantages.
1. Can obtain uniform film thickness
2. Good permeability, improve the corrosion resistance of the inner
cavity of the workpiece
3. High safety, low pollution coating (paint), no fire danger
4. The appearance of the electrophoretic coating film is good, and
it has good flatness when dried.
Peripheral Water Pump Application
These clean water pumps with peripheral impellers are capable of
providing relatively low power high pressures and have a
particularly stable operating curve. Suitable for home, garden,
hotel, and recirculating water pressure, municipal water supply and
drainage, air conditioning water circulation, agricultural
engineerings, such as irrigation, drainage and flooding, industrial
water supply systems, fire protection systems, heating system water
supply, and drainage, clean water transportation, etc.
Peripheral Water Pump Data ( 220V/50HZ )
|Q.Max (L/min)||H.Max (m)|
|Suction. Max (m)||Inlet/Outlet|
Peripheral Water Pump Construction
Pump Body: Cast iron
Mechanical Seal: Carbon
Frant Cover: Cast iron
Heavy-Duty Continuous Work
Motor Housing: Aluminum
Shaft: Stainless Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Construction and safety standards in compliance with IEC
220V/50HZ.60HZ 110V/50HZ.60HZ 220v.110v/50hz.60hz are available on
Peripheral Water Pump Use Precautions:
Before preparing to install the pump, first check whether the
firmware of each part is loose or not. There is no foreign matter
jam in the pump flow path, so as to avoid the situation that it
cannot be cleaned after the later installation. Check the water
source and water level before use. In order for the pump to work
properly, it should be installed in a covered area or in a closed
environment. Avoid using pumped water or non-corrosive liquids, and
no sand or other solid impurities.
|Transmission medium||Vortex Water|
|Pump body||Cast Iron|
|Stator&Rotor||1.Cold-rolled silicon steel sheet by high-speed punching machine.
2. 100% high-quality copper wire|
|Front cover||Cast Iron||Brass plate embedded to avoid impeller jam|
|Bearing||Chinese Best Quality Bearing||NSK, SKF or on request|
|Mechanical seal||Graphene/Ceramic||Silicon Carbon|
|Shaft||Carbon Steel||Stainless Steel|
|Insulation||Class B||Class F|
|Voltage||220-240V Single Phase||On Request|
|Automatic Pressure Control System||No||Yes|
|Cooling Type||External Ventilation|
|Max. Suction lift||9M|
|Max. Fluid Temperature||+60℃|
|Max. Environment Temperature||+40℃|
|CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC|
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide the free easy-damaged
spare part for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect man-made operation. After expiration, our
company provides cost spare parts for maintenance.
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available, feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making, also we can
advise how to make the products according to customers' target
1. Q: What’s the MOQ?
A: Trial sample order is ok.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept to use our logo?
A: Yes, we can do OEM for you.
4. Q: How can I get the pump?
A: Usually we suggest express for samples, if the volume reaches
1m³, the Seaway will be better.
5. Q: What’s the warranty period?
A: 1 year.